Frequently Asked Questions

Roofing FAQ's

It is mainly for Protection. Your roof is the barrier that separates the interior of your home from the outside world. If it’s in good condition, your roof will protect you from snow, hail, rain, ice, branches, and debris. If your roof is in poor condition, your home may leak, develop mold and mildew, and experience other issues.

Asphalt shingles are the best choice for most houses because they are relatively lightweight, inexpensive, and simple to install. They are sold in sheets that are layered on a roof to give the appearance of more expensive single shingles, such as cedar and slate, which are installed one shingle at a time.

Flat (or shed) roofs, gabled roofs, hipped roofs, arched roofs, domed roofs, and a variety of other configurations. Roof angles, which can range from nearly flat to steeply pitched, are an important aspect of roof shape.

  • Bonnet Roofs – This roof’s main feature is its twin slopes that incline at different angles.
  • Gable Roofs – These are also known as peaked roofs and can be identified by their triangular outlines.
  • Flat roofs – In contrast to the many different types of sloped roofs, this one is nearly level.

Pitched roofs are typically made of asphalt, composite, wood, cedar, slate, metal shingles, or standing seam metal.

Simply multiply the length (A) by the width (B) to get the total square footage of the roof: A x B = 120′ x 100′ = 12,000 sq. ft.

A roof with only hips (the sloping part) and a gable (the triangular bit on the end of the roof) is the cheapest roof design. Many subdivisions require a hip and gabled roof (rather than just a hip roof), which is the most common type of roof construction.

Gable roofs, also known as pitched or peaked roofs, are among the most common roof types in the United States. Their triangular shape makes them easily identifiable.

The roof is part of the building’s exterior and is one of the first things that outsiders look at to determine the quality of any construction.

The top 5 roofing materials

  1. Asphalt shingle roof.
  2. Standing seam metal roof.
  3. Cedar shake roof.
  4. Composite (synthetic) shingle roof.
  5. Slate roof.

Siding FAQ's

Vinyl siding’s low cost, versatility, and ease of maintenance have helped it become the most popular siding choice in the United States.

  • Vinyl Siding: 60+ Years (warranties last between 20-40 years)
  • Fiber cement siding has a lifespan of 50 years or more.
  • Stucco siding has a lifespan of 50-80 years, depending on how it is supported.
  • Metal siding has a lifespan of up to 40 years.
  • Wood Siding: 20-40 years.

Engineered hardwood. Engineered wood siding, the most durable siding on the market, combines the aesthetics of real wood with engineered wood strand technology for superior durability.

Vinyl siding typically lasts between 20 and 40 years. This appears to be a large window, but its lifespan is dependent on a number of factors. The amount of sun your home receives, the weather, and other factors can all have an impact on how long it lasts.

Brick is sometimes used as an alternative to other types of siding, such as wood, because it is much more durable and long-lasting, and requires less maintenance. While these benefits are true, brick is not always the best choice for a home’s primary cladding.

  • Grays – are one of the most popular home exterior colors.
  • White – is a symbol of tranquillity and peace.
  • Sage Green – as nature intended.
  • Mint green – is refreshing.
  • Pale blue – that is whimsical.

Fiber cement siding does not need to be cleaned frequently because it is mold and mildew resistant. Hosing off visible dirt will keep your siding looking new for years.

Contrary to popular belief, smaller homes look better in darker tones, while larger homes look better in lighter tones. It’s all about how the siding draws attention to the spaces.

Vinyl siding is one of the simplest to install when compared to other types of siding. It cuts easily, installs quickly, and does not require painting.

Gutter FAQ's

Because of the amount of rain in most areas, gutters are required. Gutters are more likely to come in handy in areas where the ground slopes towards a house. Unless your roofer specifically advises you not to have gutters, it’s a good idea to have them installed.

Micro-mesh is widely regarded as the best gutter guard material on the market. The micro-mesh screen keeps almost all debris out while still allowing proper water flow off the roof. The micro-mesh materials are long-lasting and frequently have channels that allow water to pool on the guard and eventually seep in.

Gutter styles are classified into three types: K-style, half-round, and box gutters. Each of these styles is available in a number of materials, including aluminum, copper, vinyl, and galvanized steel.

Gutter systems have a slight downward pitch toward the home’s corners, allowing rainwater or snowmelt to flow “downhill” through the gutters and into downspouts. A downspout is a vertical pipe that runs along the side of a house. It is connected to a hole in the gutter channel at the top.

Aluminum gutters last longer than vinyl gutters. They will not sag and can last for 20 years or more in most climates. Coastal areas may cause corrosion in aluminum gutters due to moisture and salt exposure. Heavy snow, hail, and wind, on the other hand, can dent or even damage aluminum gutters.

Most houses in most parts of the country can handle rainfall with five-inch K-style gutters or six-inch half-rounds, which are the most common residential sizes.

The lack of rain gutters contributes to this phenomenon because rainwater cascading from your roof carries enough force to wash away soil faster than falling rainwater. Garden erosion can cause extensive damage, necessitating costly soil fertility treatments.

Gutters are your foundation’s first line of defense against standing water. Gutters collect rainwater as it falls from your roof and channel it to a downspout. The downspout safely directs the water away from your home or into a larger drainage system.

To limit the effects of thermal expansion in gutters, 50 ft (15.3 m) is a practical maximum length of the gutter to be served by a downspout.

Rainwater is collected by the gutter system, routed to the downpipe, then to a gully, and finally to a soakaway. Because soakaways can allow contaminants to enter the groundwater table, there are restrictions on where they can be installed.

Solar FAQ's

Solar power is non-polluting and emits no greenhouse gases after installation. Reduced reliance on imported oil and fossil fuels. Renewable clean energy is available every day of the year, even on cloudy days. Unlike paying utility bills, there is a return on investment.

The average lifespan of a solar installation is 25 years. Manufacturers can guarantee that panels will operate at or near their peak efficiency during this time. The majority of warranties guarantee at least 80% of the rated output.

Home solar, unlike fossil fuels such as coal and natural gas, does not emit harmful pollutants or greenhouse gas emissions, such as carbon dioxide, into the air and water supply. Solar can save more than 25,000 lives and save $167 billion in health and environmental damages by reducing air pollution.

In the best-case scenario, your solar panels should receive four or five hours of direct sunlight. That sunlight should specifically reach your panels between 10 a.m. and 3 p.m. When the sun is at its highest point, the rays are the most direct.

Installing a solar system costs around $5,990. While this is an estimate of what a homeowner might pay, prices vary. It is critical to consult with solar consultants in order to determine the size of the system you will need.

  • Solar energy is the most abundant energy source on the planet.
  • Solar power is the most rapidly expanding energy source.
  • Solar energy is the world’s cheapest source of energy.
  • Solar energy has been used since 1839.
  • Solar panel efficiency is now higher than it has ever been.

Storm Damage FAQ's

Thunderstorms, according to the National Severe Storms Laboratory, can cause damage due to high winds, flash flooding from rain, and lightning strikes. Tornadoes can be spawned by strong thunderstorms, causing massive destruction to personal and commercial property.

If property damage occurs, file an insurance claim as soon as possible. Take photos of any damage before cleaning up and repairing it—you’ll need them for insurance claims. Notify your claims specialist of any mitigation actions you take. Completing temporary repairs will help you avoid further damage.

The most damage is caused by storm surges, which cover a smaller area than hurricane winds.

When thunderstorms form, they attract pollution and chemicals, transporting the majority of it many miles into the upper atmosphere. Scientists believe these pollutants are forming upper-atmosphere ozone, a greenhouse gas that contributes to climate change by trapping the sun’s energy.

Even after the storm has passed, there are numerous other dangers that can harm you. Many people are injured or killed while walking or driving in the aftermath of the storm. Live power lines, gas leaks, dangling tree branches, flooding, damaged roadways, and dangerous wildlife (such as snakes and alligators) can all be fatal.

Strong downbursts can cause extensive damage, which is often comparable to that caused by a small tornado. A downburst can easily topple trees, overturn a mobile home, and tear roofs off houses. Hail the size of a quarter (1 inch) or larger can be produced by severe thunderstorms.

Make sure the trees and shrubs around your home are well-trimmed so they can withstand strong winds. Clear out any clogged or loose rain gutters and downspouts. Reinforce your garage doors; wind can cause dangerous and expensive structural damage if it enters a garage.

One of the most effective ways to protect your home is to install storm shutters on windows, sliding glass doors, skylights, and French doors. Manufactured shutters are available in wood, steel, and aluminum. Storm shutters can also be made from 5/8-inch thick exterior-grade plywood.

If a covered disaster completely destroys your home, your standard homeowner’s insurance policy includes “loss of use” or “additional living expense” coverage, which pays for temporary housing while you recover. It settles your mortgage, releasing you from that obligation.

Keep up to date on weather forecasts. Put your family’s emergency plan into action, and double-check your escape kit in case you need to leave quickly. All items that could be blown around and cause harm in high winds should be secured or moved indoors. Close all windows and doors, both external and internal.

Following these steps is the best way to protect yourself and your family in the event of a thunderstorm: Remove yourself to a safe location away from windows and doors. Turn around, don’t drown – stay away from floodwaters. Prepare for secondary hazards such as flooding, power outages, landslides, and damaged structures.

Skip to content